Properties
Form…………………………..liquid
Color…………………..light yellow
Foam……………………………..low
Spec. Grav. @ 68°F(20°C) 1.21
lbs per gal……..10.08 (4.57 kg)
pH 1% solution………………12.3
Contains chlorine………….2.8%
Alkalinity:
Active……………………………5.5%
Total……………………………..7.6%
Formula ingredients contain no phosphorus.
Directions
Cleaning Pipelines and Milking Units:
- Pre-flush pipelines and milking units with large volume of potable water.
- Prepare wash solution using 1 fluid ounce(s) of Liquid HD-325TM per each 3 gallon(s) of hot water. Temperature must not go below 100 ̊F/ 38 ̊C during the wash cycle.
- Circulate wash solution through system for 8-10 minutes. Brush-wash all parts not coming in contact with the wash solution. Wear impervious gloves when brush-washing equipment.
- Rinse with large volume of potable water to remove all wash solution. Allow to drain.
- Finish with the proper use dilution of an EPA registered acid sanitizer to acid rinse and sanitize in one easy step, or use the proper dilution of a pipeline acid cleaner to acid rinse the system. Allow to drain.
- Just before milking (no sooner than 30 minutes), sanitize by circulating proper ppmsolution of a recommended EPA-registered sanitizer. Drain completely.
Cleaning Bulk Tanks:
- Pre-flush bulk tank with large volume of potable water.
- Prepare wash solution in volume necessary to properly operate the spray device, using 1 fluid ounce(s) of Liquid HD-325TM per each 2 gallon(s) of hot water. Temperature must not go below 100 ̊F/ 38 ̊C during the wash cycle.
- Spray-wash for 8-10 minutes. Disconnect return line and drain. Inspect all milk zonesurfaces for cleanliness. Prepare wash solution using 4 fluid ounces of a chlorinatedmanual cleaner and not more than 1 gallon of hot water. Brush-wash valve, outside of tank and any part of tank not cleaned by spraying system. Wear impervious gloves when brush-washing equipment.
- Rinse inside and outside of bulk tank with potable water to remove all wash solution. Allow to drain.
- Finish with the proper use dilution of an EPA registered acid sanitizer to acid rinse and sanitize in one easy step, or spray rinse with proper use dilution of a pipeline acid cleaner. Allow to drain.
- Just before milking (no sooner than 30 minutes), sanitize by circulating proper ppmsolution of an appropriate EPA-registered sanitizer. Drain completely.