0 items - $0.00

Cir-Klenz II

$67.85$675.85

Cir-Klenz™ II is a premium liquid,chlorinated detergent with aunique chlorinestable surfactant that is formulated for circulation and cleaning of dairy equipment. Not for use as a hard surface disinfectant or sanitizer.

SKU: N/A Categories: ,

Properties

Form……………………………liquid
Color……………………light yellow
Foam………………………………low
Spec.Grav. @68°F(20°C) 1.159
lbs per gal…………9.65(4.39 kg)
pH 1% solution……………….12.3
Contains chlorine………….2.8%
Alkalinity:
Active…………………………….5.5%
Total………………………………7.6%
Formula ingredients contain no phosphorus.

Benefits

Helps Save Money

  • Better soil penetration from superior wetting agents.•
  • Longer chlorine stability at higher storage temperatures (>100°F) than standard chlorinated alkalines.
  • Better hard water tolerance (>22 grains) than standard chlorinated alkalines.

Helps Save Time

  • Built-in water conditioners, chelates, chlorine, and surfactants.
  • Saves time – no mixing or dissolving required.
  • Improved rinse-ability over traditional chlorinated detergents leads to shorter rinse times and less rinse water.

Quality Assurance

  • Enhances finished product quality and shelf life when used in a total Ecolab product and professional services program.
  • Chlorinated formula attacks and removes protein soils.
  • Prevents hard water precipitates leaving stainless steel bright and shiny.

Directions

Cleaning Pipelines and Milking Units:

  1. Pre-flush pipelines and milking units with large volume of potable water.
  2. Prepare wash solution using 1 ounce of Cir-KlenzTM II per each 3 gallons of hot water.Temperature must not go below 100 ̊F./38 ̊C. during the wash cycle.
  3. Circulate wash solution through system for 8-10 minutes. Brush-wash all parts notcoming in contact with the wash solution. Wear impervious gloves when brush-washing equipment.
  4. Rinse with large volume of potable water to remove all wash solution. Allow to drain.
  5. Finish with an appropriate EPA registered acid sanitizer to acid rinse and sanitize in one easy step, or use the proper dilution of a pipeline acid cleaner to acid rinse the system.Allow to drain.
  6. Just before milking (no sooner than 30 minutes), sanitize by circulating proper ppmsolution of an appropriate EPA registered sanitizer. Drain completely.

Cleaning Bulk Tanks:

  1. Pre-flush bulk tank with large volume of potable water.
  2. Prepare wash solution in volume necessary to properly operate the spray device, using1 ounce of Cir-KlenzTM II per each 2 gallons of hot water. Temperature must not gobelow 100 ̊F./38 ̊C. during the wash cycle.
  3. Spray-wash for 8-10 minutes. Disconnect return line and drain. Inspect all milk zonesurfaces for cleanliness. Prepare wash solution using 4 ounces of a chlorinated manualcleaner and not more than 1 gallon of hot water. Brush-wash valve, outside of tank andany part of tank not cleaned by spraying system. Wear impervious gloves when brushwashing equipment.
  4. Rinse inside and outside of bulk tank with potable water to remove all wash solution.Allow to drain.
  5. Finish with the proper use dilution of an appropriate EPA registered acid sanitizer toacid rinse and sanitize in one easy step, or spray rinse with proper use dilution of apipeline acid cleaner. Allow to drain.
  6. Just before milking (no sooner than 30 minutes), sanitize by circulating proper ppmsolution of an appropriate EPA registered sanitizer. Drain completely.

The MMPA Farm Supply Store sells products only to customers in Michigan, Indiana, Ohio and Wisconsin.