0 items - $0.00

Mandate Plus-Acid Sanitizer

$28.15$382.06

Mandate™ Plus is an EPA-registered, low-foaming acid sanitizer with antimicrobial efficacy. The product is designed for automated CIP systems.

Clear
SKU: N/A Categories: ,

Properties

Form…………………………….liquid
Color…………………….light yellow
Odor………………………….pungent
Foam……………………………….low
Wetting ability………………..good
Spec.Grav.@68°F(20°C)….1.170
lbs per gal…………..9.75 (4.43 kg)

Active Ingredients:

—Nonanoic Acid…………..6.30%
—Decanoic Acid……………1.09%
Inert Ingredients…………92.61%
TOTAL……………………..100.00%

Benefits

Saves Time and Labor

  • Sheeting action provides spotless, film-free equipment
  • Performs acid rinse and sanitizing in one step
  • Low-foaming formula enables effective CIP flow

Promotes Quality Assurance

  • Remains soluble in use solution for long periods of time
  • Enhances finished product quality and shelf life when used in a total Ecolab product and professional service program
  • Leaves equipment surfaces shining – mixture of anionic and nonionic surfactants provides better wetting and rinsing
  • Non-corrosive to stainless steel equipment at recommended use concentrations

Environmental Implications

  • Low phosphate level
  • Product contains no iodine, chlorine, quarts
  • Sanitizes during the acid rinse cycle, reducing water volume and related changes during clean-up

Directions

It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. For Dairy and Food Processing Equipment, Tanks, Vats, Pails, Pipelines, and Closed Systems: Remove all gross food particles and soil by a pre-flush or pre-scrape, and when necessary, a presoak treatment. Clean all surfaces thoroughly with proper detergents and rinse with potable water.

Sanitize CIP or COP equipment by immersion, circulation or coarse spray sanitizing techniques, as appropriate. For sanitizing by immersion or circulation, use Mandate Plus at 1.0 to 1.1 ounces per 6 gallons (1.30 to 1.43 mL per Liter) of water. For coarse spray sanitizing, use 0.9 to 1.0 ounces per 3 gallons (2.34 to 2.60 mL per Liter) of water. All surfaces should be exposed to sanitizing solutions for a period of not less than 2 minutes. Drain thoroughly and then air dry. Regular use of MandateTM Plus will prevent the formation of milkstone or mineral stone on processing equipment.Note: For mechanical operations repeated use solutions may not be reused for sanitizing, but may be reused for other purposes such as cleaning.