0 items - $0.00

Envirocid Plus

$111.37$335.60

Envirocid™ Plus is a highly concentrated, nitric/sulfuric acid detergent. Envirocid Plus is designed for CIP circulation and COP cleaning of 304 and 316 stainless steel equipment.

Clear
SKU: N/A Categories: ,

Properties

Form……………………………….liquid
Color…………………………………..red
Odor…………………………….pungent
Spec.Grav.@ 68°F(20°C) ……1.211
lbs per gal…………….10.09 (4.6 kg)
pH 1% solution……………………..1.3
Total Acidity…………………….29.2%
Calculated as Nitric Acid 37.5%
Formula ingredients contain no phosphorus.

Benefits

Promotes Quality Assurance

  • Rapidly dissolves milkstone, other minerals and hard water scale.
  • Wetting agents help penetrate fatty and burned on soils.
  • Maintains low foam levels in CIP applications to improve cleaning efficiency.
  • Contains an acid red dye for quick identification.

Saves Time and Money

  • Highly concentrated formulation for use-cost effectiveness.
  • No need for expensive additives as formulation contains wetting agents to assure quick, complete soil penetration and removal.

Environmental Implications

  • Formulation contains no phosphorus.
  • Formulation has less nitrates as compared to most other concentrated acid products.

Directions

Envirocid Plus is to be used for CIP or COP applications that have 304 and 316 stainless steel equipment. Use EnvirocidTM Plus for an acidified rinse program on all equipment at a concentration of 1.0 ounce per 7.0 gallons (1.1 mL/L) in cold water (where applicable) for 5-10 minutes. Concentration may need to be adjusted depending on alkalinity of water and alkaline wash residual in circuit. Acid rinse pH should be 4 – 5. Use EnvirocidTM Plus for acid wash CIP applications at a concentration of 0.5 – 3.0 ounces per 1.0 gallon of water (3.9 – 23.4 mL/L). Circulate at 150 – 160° F (66 – 71° C). Rinse with potable water. Use EnvirocidTM Plus for COP applications at a concentration of 1.0 ounce per 7.0 gallons (1.1 mL/L) in cold water for 10 minutes for acidified rinse.