0 items - $0.00

Cynergy Pre and Post

$72.87$622.47

Cynergy® Pre-Post is a unique fatty acid based teat dip that provides protection against mastitis-causing pathogens. Cynergy Pre-Post also contains a blend of emollients for superior teat conditioning.

SKU: N/A Categories: ,

Properties

Form……………………………..liquid
Color………………………………green
Odor……………………………..herbal
Spec.Grav. @68°F (20°C)1.028
lbs/gal…………………8.63 (3.91 k)
100% pH……………………………4.2
Inert Ingredients…………….99.3%
Active Ingredients:
Heptanoic Acid…………………0.7%

Features/Benefits

  • Contains 0.7% heptanoic acid to provide superior efficacy without the harsh drying effect encountered with iodophor-based teat dips.
  • Passes AOAC sanitizer test with a greater than 99.999% (> 5 log) reduction with only 15 seconds contact time, even in the presence of a 10 % milk challenge.
  • Equally effective against both contagious and environmental mastitis organisms, such as Escherichia coli, Streptococcus agalactiae, Streptococcus uberis and Staphylococcus aureus.

Directions

Important: Do not mix Cynergy® Pre-Post with water, any other teat dips, or other products unless specified in product use instructions. If transferred from this container to any other, make sure that the other container is thoroughly pre-cleaned and bears the proper container labeling for Cynergy® Pre-Post. If product in dip cup becomes visibly dirty, discard contents and replenish with undiluted product. Do not reuse or return any unused product to the original container.

Before Milking: Wash teats thoroughly just prior to next milking with appropriate udder wash solution or pre-milking teat dip or teat spray to avoid contamination of milk. Teats should then be dried with single-service towels. Use proper procedures for udder washing or pre-dipping.

Pre-Milk Dipping: Fill teat dip cup with Cynergy® Pre-Post. Do not dilute. Before each cow is milked, dip each teat full-length into the teat dip cup containing Cynergy® Pre-Post. Wipe teats dry after dipping, using single-service towels to avoid contamination of milk.

Post-Milk Dipping: Immediately after each milking, use Cynergy® Pre-Post at full strength. Dip each teat full-length into the teat dip cup containing Cynergy® Pre-Post. Allow to air dry. Do not wipe. Always use fresh, full-strength Cynergy® Pre-Post. Do not turn cows out in freezing weather until Cynergy® Pre-Post is completely dry.

Directions for Teat Spraying

Pre-Milk Spraying: Before each cow is milked, spray entire teat with Cynergy® Pre-Post. Wipe teats after spraying using single-service towels to avoid contamination of milk.

Post-Milk Spraying: Immediately after each milking, use Cynergy® Pre-Post at full strength. Spray entire teat with Cynergy® Pre-Post. Allow to air dry. Do not wipe. Always use fresh, full-strength Cynergy® Pre-Post. Do not turn cows out in freezing weather until Cynergy® Pre-Post is completely dry.

Expanded Usage: When freshening cows, begin dipping teats twice daily for about 10 days before calving.