Properties
Appearance………..clear liquid
Density………………….9.5 lbs/gal
pH………………..2.8(1% in water)
Odor…………………………pungent
Benefits
- Exceptional hard water tolerance
- Proven efficacy
- Low foaming
- Rinses easily, leaving film-free and shiny equipment
- Patented
- EPA # 4959-41-3276
Directions
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Remove gross food particles and soil by a pre-flush or pre-scrape and when necessary, pre-soak treatment. Clean all surfaces with a chlorinated alkaline cleaner, followed by a potable water rinse prior to the application of the sanitizing solution. Sanitize equipment prior to use with a solution of 1 ounce per 6 gallons of water, to provide 90 ppm of decanoic and nonanoic acid. Circulate sanitizing solution through CIP or COP systems for a minimum of 2 minutes. Sanitizing solutions should have a pH of 4 or below. Completely drain solution and allow to air dry. For mechanical operations, the prepared use solution may not be reused for sanitizing, but may be re-used for other purposes such as cleaning. For manual operations, fresh sanitizing solution should be prepared daily or more often if the solution becomes dirty or soiled.